PrimaLuna EVO 100 Tube Phonostage V2

Overview

The PrimaLuna EVO 100 Tube Phonostage V2 brings the brand's all-tube philosophy to the front end of your analog system. Built to the same extreme engineering standard as every PrimaLuna component, it is a standalone phono preamplifier that keeps the controls simple while delivering the warmth, dimension, and quiet detail that vinyl lovers chase. It supports both moving magnet and moving coil cartridges, so it grows with your turntable and cartridge choices over time.

Inside, this is pure PrimaLuna. A massive custom power transformer with full protection feeds a tube rectified, tube stabilized power supply using two 5AR4 rectifier tubes and two EL34. The gain stage for moving magnet is handled by four 12AX7 tubes, while moving coil gain comes from two 6922 tubes. Everything is joined with point to point wiring using premium Swiss wire, alongside ceramic tube sockets and gold plated connectors.

The delicate moving coil signal path is protected by mechanically decoupling the board, which helps keep noise low and micro detail intact. Whether you pair it with an all-tube PrimaLuna system or a revealing solid-state rig, the EVO 100 Phonostage V2 offers big levels of detail without a shred of harshness. Finished in your choice of Silver or Black with PrimaLuna's deep, hand-rubbed five-coat paint, it is a phono stage built to last for years of listening.

Key Features

• MM and MC Support. Handles both moving magnet and moving coil cartridges, with separate tube gain paths tuned for each, so you are ready for a wide range of cartridges.
• Tube Rectified Power Supply. Two 5AR4 tubes rectify the power supply and two EL34 tubes stabilize it, delivering the smooth, stable foundation that defines the PrimaLuna sound.
• Dedicated Gain Stages. Four 12AX7 tubes form the moving magnet gain stage, while two 6922 tubes provide moving coil gain for low output cartridges.
• Point to Point Wiring. Built by hand with point to point wiring using premium Swiss wire, ceramic tube sockets, and gold plated connectors for reliability and clarity.
• Massive Power Transformer. A large custom power transformer with full protection anchors the design and contributes to the phono stage's substantial 27.9 lb weight.
• Decoupled MC Board. The delicate moving coil signal path is protected by mechanically decoupling the board, helping preserve low level detail and keep noise down.
• Simple, Intuitive Setup. PrimaLuna kept the controls as straightforward as possible so you can dial in your cartridge and get to listening quickly.

How the PrimaLuna EVO 100 Tube Phonostage V2 Compares

PrimaLuna EVO 100 Tube Phonostage V2 vs MoFi Electronics MasterPhono MM/MC Phonostage

The MoFi MasterPhono is a fully featured solid-state MM/MC phono stage with extensive adjustability. The EVO 100 answers with an all-tube signal path and tube rectification for a warmer, more dimensional presentation.

PrimaLuna EVO 100 Tube Phonostage V2 vs Parasound JC3+ Phono

The Parasound JC3+ is a highly regarded solid-state phono stage known for dead quiet backgrounds. The PrimaLuna trades that solid-state character for the bloom and body of a tube design.

PrimaLuna EVO 100 Tube Phonostage V2 vs Luxman E-250 Phono

The Luxman E-250 offers refined solid-state phono performance in a compact chassis. The EVO 100 is a larger, tube rectified alternative for listeners who want an all-tube front end.

PrimaLuna EVO 100 Tube Phonostage V2 vs TEAC Audio PE-505 Fully-Balanced Phono Amplifier

The TEAC PE-505 is a fully balanced solid-state phono amplifier with balanced connectivity. The PrimaLuna focuses on single-ended RCA connections and the musicality of vacuum tubes.

Frequently Asked Questions

Does the EVO 100 Phonostage V2 support both moving magnet and moving coil cartridges?

Yes. It supports both moving magnet and moving coil cartridges. Moving magnet gain runs through the 12AX7 tubes and moving coil gain runs through the 6922 tubes.

Is this a tube phono stage or solid-state?

It is a full vacuum tube phono preamplifier. The signal path uses tubes throughout, and the power supply is tube rectified and tube stabilized.

What tubes does the EVO 100 Phonostage V2 use?

It uses two 5AR4 rectifier tubes, two EL34, four 12AX7, and two 6922 tubes.

Which tubes handle moving magnet cartridges?

The four 12AX7 tubes form the gain stage for moving magnet cartridges.

Which tubes handle moving coil cartridges?

The two 6922 tubes provide the gain stage for moving coil cartridges.

Is the power supply tube rectified?

Yes. The power supply is rectified by two 5AR4 tubes and stabilized by two EL34 tubes for a stable, refined foundation.

What inputs and outputs does it have?

It provides one stereo RCA input and one stereo RCA output.

What finishes are available?

The EVO 100 Phonostage V2 is available in Silver and Black, both with PrimaLuna's deep, hand-rubbed five-coat paint.

How much does the EVO 100 Phonostage V2 weigh?

It weighs 27.9 lbs, reflecting its massive custom power transformer and heavy gauge steel chassis.

What are the dimensions?

It measures 11 inches wide by 7.5 inches high by 15.9 inches deep, so allow room for airflow around the tubes.

How is the EVO 100 Phonostage V2 wired internally?

It is built by hand using point to point wiring with premium Swiss wire, along with ceramic tube sockets and gold plated connectors.

Does the power transformer have protection?

Yes. The massive custom power transformer includes full protection as part of PrimaLuna's design.

How does PrimaLuna protect the moving coil signal?

The delicate moving coil signal path is protected by mechanically decoupling the board, which helps preserve fine detail and keep noise low.

Will it match well with a PrimaLuna amplifier or preamplifier?

Yes. The all-tube signal path makes it an ideal companion for PrimaLuna gear, keeping tube magic through every part of the chain.

Can I use it with a solid-state system?

Absolutely. Paired with a revealing solid-state system, it delivers high levels of detail without a shred of harshness.

How does it compare to the MoFi MasterPhono?

The MoFi MasterPhono is a feature rich solid-state design, while the EVO 100 offers an all-tube signal path and tube rectification for a warmer, more dimensional sound. You can view the MoFi MasterPhono in our catalog to compare.

How does it compare to the Parasound JC3+?

The Parasound JC3+ is a respected solid-state phono stage with very quiet backgrounds, while the EVO 100 brings the body and bloom of tubes. See the Parasound JC3+ listing to weigh the differences.

Do I need to set anything up for my cartridge?

PrimaLuna kept things intuitive with settings for capacitance on moving magnet and gain and impedance on moving coil. Our team can help you dial in the right settings for your cartridge.

Is the EVO 100 Phonostage V2 in stock at All Elite Audio?

Yes. We are an authorized PrimaLuna dealer in Maryland and have the EVO 100 Phonostage V2 in stock in both finishes.

Why buy from All Elite Audio?

All Elite Audio is an authorized PrimaLuna dealer in Maryland, so your EVO 100 Phonostage V2 arrives brand new with full warranty support. We offer expert setup guidance, genuine factory backing, and personal service from a team that lives and breathes high end audio.