Skip to product information
1 of 7

Luxman

Luxman L-507Z

Integrated Amplifier (USED)

Luxman L-507Z

Regular price $6,995.00
Regular price $10,495.00 Sale price $6,995.00
SALE Sold Out
Free shipping
Product questions? Found a lower price?
Let us know: 443-402-5055 or text us 443-402-5064.
Have a trade-in item? Click here.

Trade-in Form

Tell us about yourself

Tell us about your trade-in item(s)

Trade-in item 1
Any technical problems with this piece?
Any scratches, dents, discoloration, or other physical wear?
Do you have the original accessories (manual, remote, power cable, etc.)?
Do you have the original product packaging?

A used Luxman L-507Z in like-new condition. Please see pictures for condition details. This item is covered by a 90-day All Elite Audio warranty. The L-507Z is the debut model of Luxman's new Z series, representing a significant generational leap forward from the outgoing U series and introducing the brand's newly developed LIFES 1.0 (Luxman Integrated Feedback Engine System) amplification circuit. Built around a three-stage Darlington triple-parallel push-pull output stage, it delivers 110 watts per channel into 8 ohms and 210 watts per channel into 4 ohms in Class AB operation — power output comparable to a dedicated separate power amplifier.

LIFES 1.0 is a fundamental evolution of Luxman's long-standing ODNF (Only Distortion Negative Feedback) circuit, redesigned from the ground up using advanced simulation technology and extensive listening-led development. Rather than feeding any portion of the original audio signal back to the main amplifier, it isolates and cancels only the distortion component, achieving a measured reduction in amplification stage distortion to less than half that of the previous system. The power supply is built around a custom-made 600VA EI-type transformer feeding eight 10,000μF large-capacity filter capacitors for instantaneous current delivery under demanding dynamic loads.

The LECUA1000 electronically controlled 88-step attenuator is integrated directly into the amplifier circuit for minimal signal degradation across the full volume range, with a discrete buffer stage at the preamplifier output for confident drive of the subsequent power stage. A fully discrete MM/MC phono stage supports high-quality analog playback, and dual headphone outputs are provided including both a standard 6.3mm jack and a 4.4mm balanced output with independent left and right ground wiring for improved channel separation. Two balanced XLR inputs, four RCA line inputs, pre-out and main-in connectivity, A/B speaker switching with robust binding posts, defeatable tone and balance controls, a loudness function, and a 12V trigger output round out an exceptionally comprehensive feature set. The softly backlit needle-type analog VU meters and solid aluminum remote control complete one of the finest integrated amplifiers available at its price point.

Specs
Type Integrated amplifier
Rated output 110W+110W(8Ω) / 210W+210W(4Ω)
Output configuration Bipolar 3-parallel push-pull
Input sensitivity / input impedance PHONO(MM): 2.5mV / 47kΩ ; PHONO(MC): 0.3mV / 100Ω ; LINE: 180mV / 47kΩ ; BAL.LINE: 180mV / 79kΩ ; MAIN IN: 1.05V / 47kΩ
Output voltage PRE OUT: 1V
Frequency response PHONO: 20Hz to 20kHz (±0.5dB) ; LINE: 20Hz to 100kHz (within -3dB)
Total harmonic distortion 0.007% or less (8Ω, 1kHz) ; 0.03% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A) PHONO (MM): 91dB or more ; PHONO (MC): 75dB or more ; LINE: 105dB or more
Volume adjustment New LECUA1000
Amplification feedback circuit LIFES 1.0
Damping factor 300
Max. amount of tone control BASS: ±8dB at 100Hz ; TREBLE: ±8dB at 10kHz
Power supply 230V~(50Hz) / 115V~(60Hz)
Power consumption 350W ; 86W (under no signal), 0.4W (at standby)
External dimensions (W x H x D) 440 x 178 x 454 mm (17.32 x 7.01 x 17.87 in), depth including the 20mm front knob and 27mm rear terminals
External dimensions, imperial 17.3 x 7.0 x 17.9 in
Net weight 25.4kg (main unit)
Accessories Remote control (RA-17A) ; Power cable
Speaker terminal / supported Y-lug terminal dimension Y-lug width 15mm or less, throat 8mm or more
View full details