Audiolab
Have a trade-in item? Click here.
Specs
| Type | Stereo integrated amplifier, pure analog (no DAC) |
| Amplifier class | Class AB |
| Rated power (8 ohms) | 35 W per channel |
| Rated power (4 ohms) | 55 W per channel |
| THD | Below 0.003% (1 kHz, 19 W into 8 ohms) |
| Frequency response | 20 Hz to 20 kHz, within 0.3 dB |
| Signal to noise ratio (A weighted) | Above 110 dB preamp section, above 104 dB power amp section |
| Phono stage | Moving magnet (MM) |
| Line inputs | 3 x RCA |
| Line output | RCA pre out |
| Headphone output | 6.35 mm (1/4 in) jack, dedicated current feedback headphone amplifier |
| Speaker outputs | Binding posts |
| System control | 12 V trigger in and out |
| Digital connectivity | None (no DAC, Bluetooth, USB or HDMI) |
| Power transformer | Custom specified 180 VA toroidal |
| Reservoir capacitors | 2 x 15,000 µF (30,000 µF total) |
| Circuit board | Two layer PCB, heavy gauge copper, separated signal and power paths |
| Finishes | Black or Silver |
Warranty
Sold as an authorized Audiolab dealer by All Elite Audio. New Audiolab 3000A units include the full Audiolab manufacturer warranty of 3 years parts and labor for the original owner. Contact us with any setup or service questions and we will handle it with the distributor for you.
What’s in the Box
- Audiolab 3000A integrated amplifier
- Power cable
- Documentation
Overview
The 3000A is the most affordable amplifier Audiolab has ever made, and it is the new way into the brand's separates. It is also a deliberate step back from the everything box. There is no DAC, no Bluetooth, no USB and no HDMI. What you get instead is a straightforward analog integrated amplifier with a moving magnet phono stage, three line inputs, a pre out, a proper headphone amplifier and a power supply that is more serious than the price suggests.
The amplifier is Class AB, rated at 35 W per channel into 8 ohms and 55 W into 4 ohms. Those are honest numbers rather than big ones, and the measurements behind them are clean: distortion below 0.003% at 1 kHz, a frequency response from 20 Hz to 20 kHz held within 0.3 dB, and signal to noise above 110 dB in the preamp section and above 104 dB in the power amp. Feeding it is a custom specified 180 VA toroidal transformer and two 15,000 µF reservoir capacitors, 30,000 µF in total, on a two layer board with heavy gauge copper and the signal and power paths kept apart. That supply is where a budget amplifier usually gets cut, and here it has not been.
Leaving out the digital section is the point, not a gap. Digital circuitry dates quickly and adds noise to an analog board, and plenty of people already own a streamer, a CD player or a DAC they like. The 3000A gives those sources a clean amplifier to plug into, and when your digital source changes the amplifier does not have to. For vinyl the moving magnet stage takes a turntable directly, and the 6.35 mm headphone output runs from a dedicated current feedback amplifier, the same approach Audiolab uses on its more expensive models, rather than a resistor hung off the speaker outputs.
It is designed to sit beside the new Audiolab 3000CD, which supplies the DAC and digital inputs the amplifier leaves out, and the 12 V trigger in and out lets the pair, or the 3000A and the rest of your system, switch on together. Pair it with reasonably efficient standmount speakers and it makes a complete, properly engineered first hi-fi system.
Key Features
- Audiolab's most affordable amplifier to date and the entry point to its separates
- Class AB amplification rated at 35 W per channel into 8 ohms and 55 W per channel into 4 ohms
- Distortion below 0.003% at 1 kHz and frequency response from 20 Hz to 20 kHz within 0.3 dB
- Pure analog design with no DAC and no Bluetooth, USB or HDMI to add noise or go out of date
- Built in moving magnet phono stage for connecting a turntable directly
- Three line level RCA inputs plus a line level pre out for a subwoofer or power amplifier
- Dedicated current feedback headphone amplifier on a 6.35 mm (1/4 in) jack
- Custom specified 180 VA toroidal transformer
- Two 15,000 µF reservoir capacitors, 30,000 µF in total
- Two layer PCB with heavy gauge copper and separated signal and power paths
- 12 V trigger in and out for switching a system on together
- Black or silver finish to match the Audiolab 3000CD
How the 3000A Compares
Audiolab 3000A vs Audiolab 6000A MKII
The 6000A MKII is the step up within Audiolab, and the difference is mostly about what is built in. It adds an ESS Sabre ES9038Q2M DAC and Bluetooth 5.1 with aptX and aptX HD, so a TV, computer or phone can connect straight to it, and it has more power at 50 W per channel into 8 ohms and 75 W into 4 ohms. Both share a Class AB output stage, a moving magnet phono stage and a current feedback headphone amplifier. Choose the 6000A MKII if you want one box to handle digital sources and drive slightly harder speakers. Choose the 3000A if your digital source already has its own DAC, or if you are building around the 3000CD, and you would rather put the money into speakers.
Audiolab 3000A vs Mission 778X
The Mission 778X is a fully featured integrated with an ESS Sabre32 DAC, coaxial, optical and USB inputs, and Bluetooth with aptX and AAC, rated at 45 W per channel into 8 ohms and 65 W into 4 ohms. It also has a moving magnet phono stage, a headphone amplifier and a pre out. If you want streaming and digital inputs in the amplifier, the Mission covers them. The 3000A is the purist choice: no digital section at all, a three input analog layout with 12 V triggers, and a power supply built around a 180 VA toroidal transformer, for less money.
Audiolab 3000A vs LEAK Stereo 130
The LEAK Stereo 130 is the retro option, with retro styling and a walnut finish available. It adds an ESS Sabre32 DAC with USB, optical and coaxial inputs, Bluetooth with aptX, and bass and treble controls with a direct bypass, and it is rated at 45 W per channel into 8 ohms. Like the 3000A it has a moving magnet phono stage, a pre out and a current feedback headphone amplifier. Buy the LEAK for its looks and its built in DAC. Buy the 3000A for a modern, purely analog amplifier with an extra line input and 12 V triggers, at a lower price.
Speakers and Sources It Works With
The 3000A has honest rather than huge power, so it does its best work with reasonably efficient standmount speakers in small and medium rooms. These are the speakers we carry that suit it, and the Audiolab sources that fill in the digital side it deliberately leaves out.
- Wharfedale Denton Rated at 88 dB sensitivity with a recommended amplifier range of 20 to 120 W, so the 3000A's 55 W into 4 ohms drives it with room to spare. A warm, full sounding classic that rewards a clean Class AB amplifier.
- Wharfedale EVO5.1 87 dB sensitive and recommended for 25 to 100 W amplifiers, which the 3000A sits comfortably inside. Its AMT tweeter brings out the detail of a low distortion amplifier without needing a lot of power.
- Wharfedale Denton 1S A compact standmount with a 6.5 inch concentric driver that radiates from a single point, giving a focused image in a small room. A natural partner for a compact analog system built around the 3000A.
- Audiolab 3000CD The matching CD player, with an ESS Sabre32 DAC and digital inputs of its own, so it supplies the digital connections the 3000A leaves out. The 12 V triggers let the pair switch on together.
- Audiolab D7 Adds USB, optical, coaxial and Bluetooth aptX HD inputs to the 3000A through one of its line inputs, so a computer, TV or phone can play through the system.
Frequently Asked Questions
What is the Audiolab 3000A?
It is a pure analog stereo integrated amplifier and the most affordable amplifier Audiolab has made to date. It has a moving magnet phono stage, three line inputs, a pre out and a dedicated headphone amplifier, and it is the entry point to Audiolab's range of separates.
How powerful is it?
It is rated at 35 W per channel into 8 ohms and 55 W per channel into 4 ohms. That is plenty for reasonably efficient standmount speakers in small and medium rooms at normal listening levels.
What class of amplifier is it?
Class AB, the same output stage approach Audiolab uses in the 6000A MKII. It avoids the crossover distortion of pure Class B at low listening levels while running far more efficiently than pure Class A.
Does it have a built in DAC?
No. The 3000A is deliberately analog only, with no DAC and no digital inputs. To play digital sources, use a source with its own DAC, such as the Audiolab 3000CD, or add an outboard DAC like the Audiolab D7.
Does it have Bluetooth, USB or HDMI?
No. There is no Bluetooth, USB or HDMI connection. If you want to stream from a phone, the Audiolab D7 adds Bluetooth with aptX HD along with USB and optical inputs, and connects to one of the 3000A's line inputs.
Why would I want an amplifier without digital inputs?
Digital sections date quickly and add noise to an analog circuit board. Keeping them out means the money goes into the amplifier and power supply, and if your streamer or DAC changes in a few years the amplifier stays put. Many people already own a source with a good DAC built in.
Can I connect a turntable?
Yes. It has a built in moving magnet phono stage, so a turntable with an MM cartridge connects directly without a separate phono preamplifier.
Does the phono stage work with moving coil cartridges?
The built in stage is moving magnet. For a moving coil cartridge, add a phono preamplifier that handles MC, such as the Audiolab PPA7, and connect it to one of the line inputs.
What inputs and outputs does it have?
A moving magnet phono input, three line level RCA inputs, a line level pre out, a 6.35 mm headphone output, speaker binding posts, and 12 V trigger in and out.
What is the pre out for?
The line level pre out lets you add a powered subwoofer or a separate power amplifier later, so the 3000A can grow with your system.
Is the headphone output any good?
Yes. It is driven by a dedicated current feedback headphone amplifier rather than tapped off the speaker outputs, and it uses a full size 6.35 mm (1/4 in) jack.
What do the 12 V triggers do?
The 12 V trigger in and out let the 3000A switch on and off together with other components that support triggers, so one button brings the whole system up.
What speakers suit the 3000A?
Reasonably efficient standmount speakers are the best match. From our range, the Wharfedale Denton, Denton 1S and EVO5.1 all pair well. Tell us your room size and listening level and we will steer you to the right pair.
Can it drive 4 ohm speakers?
Yes. It is rated at 55 W per channel into 4 ohms, and the Wharfedale Denton, a 4 ohm design, is one of the speakers we recommend with it.
What is special about the power supply?
It uses a custom specified 180 VA toroidal transformer and two 15,000 µF reservoir capacitors, 30,000 µF in total, on a two layer board with heavy gauge copper and separate signal and power paths. That is a generous supply for an amplifier at this level.
How does it measure?
Audiolab quotes distortion below 0.003% at 1 kHz (19 W into 8 ohms), frequency response from 20 Hz to 20 kHz within 0.3 dB, and A weighted signal to noise above 110 dB for the preamp section and above 104 dB for the power amp section.
How does it compare to the Audiolab 6000A MKII?
The 6000A MKII adds a built in DAC, Bluetooth with aptX HD and more power, at 50 W into 8 ohms. The 3000A keeps the Class AB amplifier, MM phono stage and current feedback headphone amplifier but drops the digital section, which makes it the better fit if your source already has a DAC.
What finishes are available?
Black or silver, matching the Audiolab 3000CD CD player designed to sit alongside it.
What is the warranty?
3 years parts and labor for the original owner, through Audiolab's US distributor. We open any claim for you.
Why buy from All Elite Audio?
We are an authorized Audiolab dealer in Maryland, so your 3000A is genuine product with full manufacturer warranty support, and we handle any service directly. We will also help you match it with the right speakers and sources and give you expert setup guidance.
Share
