EverSolo DMP-A10 Flagship Streamer, DAC & Preamplifier

EverSolo DMP-A10 Flagship Streamer, DAC & Preamplifier

EverSolo's most ambitious all-in-one — engineered without compromise from the ground up.

The EverSolo DMP-A10 is the flagship of the entire EverSolo lineup and the most fully developed all-in-one streaming component the company has ever produced. It combines a network streamer, high-resolution DAC, digital audio player, fully balanced preamplifier, and advanced DSP processor in a single full-width chassis, with a level of engineering depth — isolation architecture, clock precision, power supply design, internal wiring, and component selection — that goes well beyond anything in the DMP-A8 or DMP-A6 lineage. If you want a single component to serve as the irreplaceable heart of a serious two-channel or 2.1-channel system, the DMP-A10 is built to be exactly that.

Available now at All Elite Audio, your authorized EverSolo dealer in Timonium, Maryland — with in-store demos, expert guidance, and nationwide shipping.

ESS ES9039PRO DAC With XMOS 316 Processing

The DMP-A10 is built around ESS Technology's flagship ES9039PRO DAC chip, which uses ESS's HyperStream IV architecture for dramatically reduced noise and distortion compared to previous generations. The ES9039PRO delivers native DSD512 and PCM up to 32-bit/768 kHz decoding with measured dynamic range exceeding 128 dB and THD+N below 0.00009 percent. Upstream of the DAC, an XMOS 316 multi-core audio processor handles USB audio transport with precision, managing the highest-resolution PCM and DSD formats with low-latency, accurate data delivery to the conversion stage.

The combination of the XMOS 316 and ES9039PRO represents ESS and XMOS's best current silicon applied to an all-in-one platform — a level of hardware investment that puts the DMP-A10's conversion performance firmly in the territory of serious standalone DACs.

Dual OCXO Clock System With Sub-50 Femtosecond Jitter

Clock performance is where the DMP-A10 most clearly separates itself from lower-tier all-in-one streamers. Rather than using standard crystal oscillators, the DMP-A10 uses a custom-developed OCXO system — oven-controlled crystal oscillators — with dedicated temperature control technology that holds both clock crystals at a constant, precisely maintained temperature point. Thermal drift in crystal oscillators is one of the primary sources of frequency instability and jitter. By eliminating that drift, the DMP-A10's dual OCXOs — one at 45.1584 MHz for 44.1 kHz multiples, one at 49.152 MHz for 48 kHz multiples — operate with measured jitter levels below 50 femtoseconds. That level of timing precision translates directly into the qualities listeners describe as air, detail, and a sense of effortless clarity in the sound.

Full Electrical Isolation Architecture

The DMP-A10 uses a high-speed electrical isolation system that physically separates the circuit boards handling different functions — digital processing, clock generation, analog output, and display — from one another. This complete physical isolation prevents noise generated in the digital processing sections from contaminating the analog audio circuits, which is one of the fundamental engineering challenges in building an all-in-one device that sounds as clean as a separate component stack.

USB audio isolation is handled by iCoupler technology, which transmits both clock and data signals across the isolation barrier in the correct time order and then resynchronizes them on the isolated side. This eliminates the ground loop issues and high-frequency interference that conventional USB connections can introduce when connecting external DACs or computer audio sources. The display panel also features its own electromagnetic shielding to prevent the display electronics from generating noise that could reach the audio circuitry.

Dual Linear Power Supplies With 30µV Ripple

The DMP-A10 uses two separate power supplies — one dedicated to the analog audio circuits and one for the digital system — each designed to operate with an ultra-low noise floor. The analog supply achieves a ripple specification of below 30µV, creating a genuinely quiet power environment for the balanced preamp stage, DAC output, and analog signal path. A patented intelligent voltage switching system for the linear supply input enables worldwide voltage compatibility without requiring manual switching, a practical detail that reflects the thoroughness of the DMP-A10's engineering.

The combination of isolated circuit boards, a low-noise linear analog supply, and separated digital power means the DMP-A10 is designed from first principles to keep its analog output as clean as physically possible given the constraints of an all-in-one chassis.

Fully Balanced Preamplifier With R2R Volume and +10 dB Gain

The DMP-A10's analog preamplifier section is fully balanced from the DAC output through to the XLR output connectors. It supports both XLR and RCA analog inputs with up to 10 dB of analog gain, allowing it to accept external sources at line level and amplify or attenuate them through the same balanced output stage. Volume is controlled by an R2R resistor-ladder network with independent left and right channel modules and 0.1 dB resolution for left-right balance adjustment, maintaining signal integrity and channel tracking accuracy at every level.

XLR outputs and RCA outputs are both available simultaneously, allowing connection to a power amplifier via balanced cables while also feeding a powered subwoofer or recording device from the unbalanced outputs.

Dual Subwoofer Outputs With Full Bass Management

One of the DMP-A10's most practical differentiators is its dual dedicated subwoofer output ports, each independently configurable. Subwoofer gain, crossover frequency, and time delay can all be adjusted independently for each output, with both mixer mode — which combines left and right channels for a single mono sub feed — and stereo mode available. This is genuinely useful for listeners running two subwoofers for better in-room bass distribution, or for those using one sub in a 2.1-channel system who want precise crossover control integrated into the source component rather than managed by an outboard processor. Note that the subwoofer function operates for PCM signals up to 192 kHz.

SFP Fiber Network Input and Network Connectivity

Like the EverSolo T8, the DMP-A10 includes a dedicated SFP fiber network port that accepts an optional fiber optic network module for a completely galvanically isolated data connection from your network switch. Standard Ethernet carries electrical energy from the network that can introduce subtle noise into sensitive audio equipment. Fiber eliminates this entirely. SFP modules are sold separately and must be compatible with your network switch. Single-mode single-fiber, single-mode dual-fiber, and SFP electrical port modules are all supported.

Gigabit Ethernet and dual-band Wi-Fi are also available for conventional network connections. Beyond standard DLNA and UPnP, the DMP-A10 supports NFS and SMB network protocols for direct access to NAS devices and network drives, as well as WebDAV, Plex, Emby, and Jellyfin for listeners who manage their libraries through media server software.

DDC Functionality and ADC Input Capture

The DMP-A10 includes a DDC — Digital to Digital Converter — function that allows digital signals arriving from USB audio input, coaxial or optical inputs, and the HDMI ARC input to be processed through the DMP-A10's DSP — including EQ, crossover, and room correction — and then output as SPDIF digital signals rather than analog. This makes it possible to use the DMP-A10 as a digital signal processor in a chain that includes an external DAC, applying its room correction and EQ tools before the signal reaches the converter.

Additionally, the DMP-A10 includes a high-specification ADC that can capture analog input signals at up to 192 kHz, digitize them, and then output the result as SPDIF or processed analog. This opens up possibilities for recording analog sources or routing them through the DMP-A10's DSP chain in ways not available on conventional streaming components.

Internal Storage, Local Library, and Media Server Support

Dual M.2 NVMe SSD slots support up to 4TB each for a maximum of 8TB of internal storage. Two USB 3.0 ports on the rear panel accept external drives for additional capacity. The EverSolo Music Library manages local collections with automatic metadata retrieval, smart organization, and gapless playback. Cross-service playlists can combine local library tracks with streaming content seamlessly.

Support for Plex, Emby, and Jellyfin means listeners who already run a home media server can access their entire managed library from the DMP-A10 without any additional configuration. WebDAV, NFS, and SMB network sharing protocols ensure compatibility with virtually every NAS and network storage solution in current use.

EOS Audio Engine and Streaming Services

EverSolo's proprietary EOS audio engine bypasses Android's system-level sample rate conversion restrictions, allowing third-party streaming apps including Apple Music, Spotify, and others to output at their native sample rates without OS-level resampling. This means bit-accurate or near-bit-accurate output from virtually every streaming service, not just those with dedicated EverSolo native integration.

Native streaming support includes TIDAL, Qobuz, Amazon Music, HIGHRESAUDIO, Deezer, TuneIn, IDAGIO, Radio Paradise, SoundCloud, Calm Radio, KKBOX, and more, with additional services added via firmware updates. Roon Ready, TIDAL Connect, Qobuz Connect, Spotify Connect, and AirPlay are all supported for integration with external control systems and multi-room setups.

Silver-Plated Single-Crystal Copper Internal Wiring

A detail that distinguishes the DMP-A10 from lower-tier all-in-one streamers is its use of silver-plated single-crystal copper wire for the internal audio connections between the analog output stage and the output terminals. Single-crystal copper has lower grain boundary resistance than standard oxygen-free copper, and silver plating adds further conductivity. The result is a more transparent, lower-resistance connection in the most signal-sensitive part of the chassis — a level of internal component quality that is typically found only in dedicated high-end separates.

6.5-Inch Touchscreen, Build Quality, and Controls

The DMP-A10's front panel features a 6.5-inch full HD color LCD touchscreen alongside a secondary rotary display — a combination that provides both a large, high-resolution main display for album art, VU meters, and spectrum analysis, and a dedicated physical control interface for volume and input selection. The chassis is CNC-machined from aircraft-grade aluminum at the full 430mm rack-compatible width, with a build quality and visual presence appropriate for a flagship component. A Bluetooth/IR remote is included.

The EverSolo Control app on iOS and Android provides full remote operation including playback control, library browsing, streaming service management, DSP settings, and room correction from any mobile device.

Key Specifications

DAC Chip: ESS ES9039PRO with HyperStream IV architecture USB Audio Processor: XMOS 316 multi-core Clock System: Dual OCXO temperature-controlled, jitter below 50 femtoseconds (45.1584 MHz and 49.152 MHz) Supported Formats: PCM up to 32-bit / 768 kHz, Native DSD512 Dynamic Range: Greater than 128 dB THD+N: Less than 0.00009% Analog Inputs: Balanced XLR, Unbalanced RCA (x2) Analog Outputs: Balanced XLR, Unbalanced RCA, Dual subwoofer RCA outputs Analog Gain: Up to +10 dB Volume Control: R2R resistor-ladder, 0.1 dB balance adjustment, independent L/R modules Digital Inputs: USB-B, Coaxial x2, Optical x2, HDMI ARC Digital Outputs: Coaxial, Optical, USB Audio ADC Capture: Analog input to digital, up to 192 kHz DDC: Yes — digital input re-output as SPDIF with DSP Internal Storage: Dual M.2 NVMe SSD slots, up to 4TB each (8TB total) External Storage: USB 3.0 x2 Network: Gigabit Ethernet, Dual-band Wi-Fi, SFP Fiber Port (module sold separately) Network Protocols: DLNA, UPnP, NFS, SMB, WebDAV, Plex, Emby, Jellyfin Streaming Services: TIDAL, Qobuz, Amazon Music, Deezer, HIGHRESAUDIO, TuneIn, IDAGIO, Radio Paradise, SoundCloud, KKBOX, and more Streaming Protocols: Roon Ready, TIDAL Connect, Qobuz Connect, Spotify Connect, AirPlay Bluetooth: Qualcomm QCC5125, BT 5.0, aptX HD, LDAC Power Supply: Dual — linear for analog (30µV ripple), switching for digital; universal voltage input Internal Wiring: Silver-plated single-crystal copper at audio terminals Display: 6.5-inch Full HD LCD touchscreen plus rotary display knob Control: Touchscreen, Bluetooth/IR remote, EverSolo Control app (iOS and Android) DSP: Parametric EQ, FIR filter import, crossover, delay, loudness, room correction Room Correction: EverSolo Digital Room Correction via USB mic or smartphone mic Chassis: CNC-machined aircraft-grade aluminum, 430mm width Dimensions (W x H x D): 430 x 117 x 310 mm (16.9" x 4.6" x 12.2") Weight: 8.5 kg (18.7 lbs) Warranty: 1 year manufacturer warranty

Why Buy From All Elite Audio

All Elite Audio is an authorized EverSolo dealer located in Timonium, Maryland — part of the greater Baltimore area. We carry the full EverSolo lineup including the DMP-A10, DMP-A8, T8 Streaming Transport, and DAC-Z10. Our showroom is purpose-built for serious listening, and our team has direct hands-on experience helping customers evaluate the DMP-A10 against other EverSolo models and competing products at similar price points.

We offer white-glove service, in-store demos, and support before and after your purchase. Whether you are local to Maryland or ordering nationwide, we are here to help you get the most from your system.

Call: 443-402-5055 Text: 443-402-5064 Visit: 1921 York Rd, Timonium, MD 21093

Frequently Asked Questions — EverSolo DMP-A10

What is the EverSolo DMP-A10 and what makes it EverSolo's flagship? The EverSolo DMP-A10 is EverSolo's top-tier all-in-one streaming component, combining a network streamer, ESS ES9039PRO DAC, digital audio player, fully balanced preamplifier, and advanced DSP processor in a full-width chassis. It sits above the DMP-A8 in every dimension of the design — DAC chip, clock precision, isolation architecture, power supply specification, internal wiring, storage capacity, and connectivity — and is built to serve as a permanent, no-compromise digital hub for a serious hi-fi or 2.1-channel system at the $3,999 price point.

How does the EverSolo DMP-A10 compare to the EverSolo DMP-A8? The DMP-A10 is a substantial step up from the DMP-A8 across nearly every specification. Key upgrades include the ESS ES9039PRO DAC replacing the AKM AK4499EX, the XMOS 316 USB processor, a dual OCXO clock system with sub-50 femtosecond jitter replacing the DMP-A8's Accusilicon clocks, full circuit board electrical isolation with iCoupler USB technology, dual linear power supplies with a 30µV analog ripple specification, dual M.2 NVMe SSD slots totaling up to 8TB versus the DMP-A8's single 4TB slot, an SFP fiber network port, dual dedicated subwoofer outputs with full bass management, silver-plated single-crystal copper internal wiring, DDC and ADC functionality, and a larger 6.5-inch full HD display. For listeners who have reached the ceiling of what the DMP-A8 can offer, or who are building a flagship system from the start, the DMP-A10 is the clear choice.

What DAC chip does the EverSolo DMP-A10 use and why does it matter? The DMP-A10 uses the ESS ES9039PRO, ESS Technology's current flagship DAC chip, which uses the fourth generation of ESS's HyperStream modulator architecture for lower noise and distortion than previous ESS designs. The ES9039PRO delivers measured dynamic range above 128 dB and THD+N below 0.00009 percent. Combined with the XMOS 316 USB processor and the dual OCXO clock system, the DMP-A10's conversion performance is firmly competitive with dedicated standalone DACs at similar and higher price points.

What is the OCXO clock system in the DMP-A10 and why is it better than standard oscillators? Standard crystal oscillators are sensitive to temperature changes that cause their resonant frequency to drift, introducing timing irregularities — jitter — into the digital audio signal. The DMP-A10 uses oven-controlled crystal oscillators that are held at a precisely maintained constant temperature, eliminating thermal drift and producing clock signals with measured jitter below 50 femtoseconds. This level of timing precision results in more accurate digital-to-analog conversion, with audible improvements in transient accuracy, imaging precision, and the sense of air and detail that separates high-end digital playback from average streaming.

What is the DDC function on the EverSolo DMP-A10? DDC stands for Digital to Digital Converter. The DMP-A10 can accept a digital signal from its USB, coaxial, optical, or HDMI ARC inputs, process it through its onboard DSP — including EQ, room correction, and crossover settings — and then re-output it as a SPDIF digital signal rather than converting it to analog. This allows the DMP-A10 to function as a digital signal processor in a system that uses a separate external DAC, applying its room correction and equalization tools before the signal reaches the converter. The ADC function additionally allows analog inputs to be digitized at up to 192 kHz and either stored, processed, or output digitally.

Does the EverSolo DMP-A10 support Plex, Emby, and Jellyfin? Yes. The DMP-A10 supports direct playback from Plex, Emby, and Jellyfin media servers in addition to its own EverSolo Music Library for locally stored files. It also supports NFS, SMB, WebDAV, DLNA, and UPnP network protocols, making it compatible with virtually every NAS and network storage configuration in current use. For listeners who have invested in a home media server setup, the DMP-A10 integrates cleanly without requiring any changes to the existing library management infrastructure.

Can the EverSolo DMP-A10 manage dual subwoofers with separate settings? Yes. The DMP-A10 includes two dedicated subwoofer RCA outputs, each independently adjustable for gain level, crossover frequency, and time delay. Both stereo mode — which sends the left and right channel low-frequency content to separate subs — and mixer mode — which combines both channels into a mono low-frequency feed — are available. This is a feature more commonly found in AV receivers and high-end standalone crossover processors, making the DMP-A10 unusually capable as a 2.1-channel control hub. Note that the subwoofer outputs are active for PCM sources at 192 kHz and below.

Is the EverSolo DMP-A10 Roon Ready? Yes, the DMP-A10 is Roon Ready certified and functions as a Roon endpoint in both single-room and multi-room configurations. It also supports TIDAL Connect, Qobuz Connect, Spotify Connect, and AirPlay for integration with other streaming control ecosystems, and DLNA/UPnP for conventional network playback.

What streaming services does the EverSolo DMP-A10 support natively? Native support includes TIDAL, Qobuz, Amazon Music, HIGHRESAUDIO, Deezer, TuneIn, IDAGIO, Radio Paradise, SoundCloud, Calm Radio, KKBOX, and additional services added via firmware updates. EverSolo's EOS audio engine allows third-party apps including Apple Music and Spotify to bypass Android's sample rate conversion restrictions and output at their native resolutions, making the DMP-A10 a genuinely high-resolution platform for virtually every streaming service in current use.

How much internal storage can the EverSolo DMP-A10 hold? The DMP-A10 includes two M.2 NVMe SSD slots, each capable of accepting a drive up to 4TB in capacity, for a maximum internal storage of 8TB. Two USB 3.0 ports support additional external storage drives. SSDs are purchased separately and installed by the user. The combination of 8TB internal capacity and NAS/network drive access means the DMP-A10 can serve as the primary storage and playback hub for even the most extensive high-resolution music collections.

What Bluetooth codecs does the EverSolo DMP-A10 support? The DMP-A10 uses a Qualcomm QCC5125 Bluetooth 5.0 module supporting SBC, AAC, aptX, aptX LL, aptX HD, and LDAC for wireless audio input. LDAC provides the highest audio quality, transmitting at up to three times the data rate of standard Bluetooth for near-lossless wireless streaming from compatible phones and computers. A Bluetooth/IR remote is also included for physical control of the device from across the room.

Where can I buy the EverSolo DMP-A10 and hear it in person? All Elite Audio is an authorized EverSolo dealer with a full home audio showroom located at 1921 York Rd, Timonium, Maryland 21093. We carry the complete EverSolo lineup and can demonstrate the DMP-A10 alongside other EverSolo products and competing components. Call us at 443-402-5055 or text 443-402-5064. We also ship nationwide.